Here we are again .Winding the tower up and down sucks ,so here's the solution .Basically what we have here is a bit of 50mm bar with some 5 mm plate bored and welded on for the side plates .Having some 40 mm bearings left over from a job means there the first port of call so the shaft is turned down to take them.
Almost finished cable drum need's to be drilled through side plate to hold the wire.The right hand extension will have a sprocket on a taper lock fitted this will be driven from a gearbox reduction with inverter for soft start ...happy days ...well nearly ....i can see the light !!!
No comments:
Post a Comment