My trials and tribulations

Hi all ,this blog is going to show some of the tricks in my life ,Enjoy !

Saturday, 7 June 2014

Rotator

Ok I got the tower up ,antenna on top ,but at the moment its fixed stateside .I need to turn it !!.cue drum roll.
.....Thats right its rotator time.Price of new ones are in the range of £1500 to £2000 with this kind of spec.Clearly im not going to pay that so here we are again in the workshop putting together a nice new one.
Motor is from a motorised invalid scooter they are on ebay Parvalux do one with reduction for around £30 ,not sure how long the price will last as it seems cheap to me !!Gearbox is a ....chinese one from the uk importer ,50:1 reduction worm drive price £79.

Output shaft on motor/gb is 12mm ,worm drive box input shaft is 14mm ..so we need a bush ,10 mins on lathe  ,you can see it in the pic .


 Motor/gb fits real snug into worm drive input shaft 



 Right upto the hilt ,picture from above motor/gb fitted ,we need adapter/torque reaction plate






Adapter plate for motor to gb 


Adapter plate fitted to motor

Motor/gb fitted to worm drive




Next is the base to tower connection ,this will also house the rotary encoder .Made with 316 stainless and 304, weld looks a little rough ....i didn't have any dissimilar rods left for the tig so a quick look in the stores and fortunately i had some 312 rods ,knocked the flux off and there ya go !!!


 Need a bottom flange to mount to the tower ..same footprint as the yaesu rotator and a shaft through the middle to fasten to the antenna pole to rotate it ...maybe tomorrow ???




Friday, 6 June 2014

Electric tower winch on original versatower mount


Motor is now mounted ,a further reduction though sprocket and chain

All tacked together,ready for welding up .The three holes at the back bolt to original hand winch mount.Fabrication wise all i need now is a chain guard.



Thursday, 5 June 2014

For the idle cranker ...electric winch

Here we are again .Winding the tower up and down sucks ,so here's the solution .Basically what we have here is a bit of 50mm bar with some 5 mm plate bored and welded on for the side plates .Having some 40 mm bearings left over from a job means there the first port of call so the shaft is turned down to take them.


Almost finished cable drum need's to be drilled through side plate to hold the wire.The right hand extension will have a sprocket on a taper lock fitted this will be driven from a gearbox reduction with inverter for soft start ...happy days ...well nearly ....i can see the light !!!


Sunday, 1 June 2014

Tower parts all back from the galvanizers,lower extension slid into base of old tower
 End welded on galvafroid over the weld joints.Re-roped ready to go
 Base put into place with trusty jcb ...bless it ,base comes in at 3/4 tonne .Bolted down with 8 x22mm bolts.

Here she is sat on the base .



First tilt over ,had a bit of a boo boo here the rope wasn't long enough duh!! came from original tower the arc was far smaller ,minor alteration from 3 falls to 2 ...its now long enough .Its 10mm rope and now has a better leverage over load (with lower extension) so will be ok !!!! 




 Antenna fitting went easy 



Clamp up mechanism and new stainless rope sheath ... lost the original one so knocked another up .


You can see here the rope route through tower and various pulleys..works great




Elements need a little leveling up ,will sort it out later .Was a bit of a struggle putting it up on my own  :-(


Sunday, 25 May 2014

Oil Oil Oil

Well this is hopefully the last incarnation of my waste oil burner .I've made a new aluminium sealed tank ,a lot smaller than the previous .Now its a lot nearer nozzle it helps to keep the oil hot before it goes into the nozzle .Top of tank is just below the nozzle so no run on after stop altho there is a solenoid on the pump so this shouldn't  be an issue (just airing on caution ).Pipe to nozzle is now only 50 mm long
Will have to see how it goes on over the winter ...long time yet lol .Its heated the water up without any bother so leaves me a little time this summer to do other stuff .........YEEEEEHA back to press a button heating .

Monday, 5 May 2014

Up in the air

 Up and on the mounts,Right view from orchard ...wire was wrong side of tower ...doh



And finally wound up 3/4 so prob 65ft to wire

Sunday, 4 May 2014

Another tower

Well i have acquired another tower !! Its a little bit under the weather but nothing a little bit of welding sanding and paint wont sort out .
 No before and after pics ,just in the middle of .
The end of top section was rotten ,mainly due to wood being put into the hollow round section to stop water ingress ,unfortunately this made it worse by actually harbouring the water causing it to rot.
So new pipe spliced into the old and made a foot (300mm) longer ...lol i just cant help it !!
 New pole mounts made .The rotator cage taken off as this is just to hold the 120m doublet up in the air 


Trial fitting of fabricated wall mount(pre paint) .20mm through bolts hold it in place .Walls are 2 feet thick (600mm)

First lower section trial fit ...looking good !!,Its a little lower than current scaffold mast which is 45-50ft ,im hoping for around 70 ft with this tower arrangement